- 1 Stereo unbalanced line level output
- 1 Stereo unbalanced line level input
- 15W Mono power amplifier
- 8 opto-isolated logic inputs, 1 opto-isolated logic output
- Works with MicroSD Card
- LAN 10/100, web based interface
- Required power 12-24VDC (PSU included)

- 1 Stereo unbalanced line level output
- 1 Stereo unbalanced line level input
- 2 x 20W power amplifier (1 x 40W in bridge mode)
- 8 opto-isolated logic inputs, 1 relay outputs, 1 input for motio
- RS-485 serial port for remote control
- LAN 10/100, web based interface and 3rd party control
- Ducking function, 5-bands EQ
- Works with MicroSD Card
- Required power 12-24 VDC or 12-15 VAC (PSU included)

- 1 Stereo unbalanced line level output
- 2 x 20W power amplifier
- microSD card slot
- 8 individually configurable logic ports
- Reserved input for infrared motion sensor, 1 relay output
- Advanced scheduler with integrated real time clock
- Playlist managment and mixing functions
- Ducking function and 5-bands EQ
- RJ45 Ethernet Port: configurable via Web interface
- 4 front panel Play, Stop, FFW & RW and Volume buttons
- Remote control via Telnet or RS485
- PSU included

- Balanced and unbalanced stereo output
- Support most popular audio formats
- Based on Linux OS
- Enterprise grade internal HDD
- Advanced scheduler, playlist managment
- An application for Windows, MAC and Linux is freely provided
- TCP/UDP commands transmission, reports via email (SMTP), TCP/IP Third party control protocol, DHCP client, NTP server/client
- 1\2 rack U enclosure compatible with optional RM-30 (rack mount tray) and FP30 (filling panel) accessories
- Internal power supply

- 4 x 80W @ 4 ohms or 2 x 160w @ 8 ohms (bridge mode)
- 4 x Balanced line inputs with trim pot
- HPF filter 30\160Hz on each channel
- 4 VCA remote level control ports
- Fault TTL logic output and relay contact
- RS 485 serial port
- 1\2 rack U enclosure compatible with optional RM-30 (rack mount tray) and FP30 (filling panel) accessories
- Internal Power Supply

In case of failure on an amplifier, through serial commands or logic inputs, you can disconnect the line of this amplifier and connect it to the backup amplifier.
- 8 inputs for connection of 8 amplifiers
- 2 inputs for connecting the back-up amplifiers
- 8 output to speaker lines
- Max power for 4/8 Ohms lines: 600 W
- Max power for 70/100V lines: 800 W
- Internal Power Supply

Heavy Duty Sensing microph. For ANC application.
- Electret omni-directional, 9-48
- Phantom Power driven: 40x96x22mm
- condenser (electret)
- omnidirectional
- 90 Hz - 15 KHz
- - 65.00dB +/- 2dB at 1 KHz
- 200O
- 42dB (A)
- 122 (THD 1%)
- 9mV RMS
- 9- 48 Volts
- 96mm (H) x 40mm (W) x 22mm (D)

Sensing microphone for ANC application.
- Electret omni-directional, 9-48 Phantom
- Power driven: 40x96x22mm
- Condenser
- Omnidirectional
- 90 Hz - 15 Hz
- - 65.00dB +/- 2dB at 1 KHz
- 200O
- 42dB (A)
- 122 (THD 1%)
- 850mV RMS
- 12VDC PSU
- 96mm (H) x 40mm (W) x 22mm (D)

15W Exciter
- 125-12Khz (type of material and geometry dependent).
- 8 ohm
- Mounting: Bi-adhesive supplied
- 50 cm wire not terminated
- Height 26.2 mm, diameter 63 mm
- 140 gr.

30W Exciter
- 80-16Khz (type of material and geometry dependent)
- 4 ohm
- Mounting: Bi-adhesive supplied or 3.5mm wood screws
- 50 cm wire not terminated
- Height 45 mm, diameter 79 mm
- 210 gr.

FP-30 1\2U 19" rack filling panel
- To be used with RM 30 when only 1 unit needs to be rack mounted
- Dark blue colour

RM-30 1U 19" rack space tray
- To install 2 devices or just 1 and a FP30 filling panel
- Same dark blue colour as the players.

- Power supply: +5vdc to +24vdc
- 5m. Maximum distance for motion detection
- Two TTL outputs, positive pulse and negative pulse
- Duration of output pulse with time adjustable: 1 sec to 10 sec
- Inhibition time adjustment between two detections: 5 sec to 12 sec
- Re-triggerable mode function
- Input to disable the sensor, compatible with I / O player InOut or external contact
- Bi-color LED indication, green = To pulse timer on, red = Ti inhibition timer on or Inibhit input active
- Consumption: 70mW max. (20mW stand-by)
- Dimensions: 70.4x50x22.7mm
- Available colors: w = Off-white d = Dark gray
- Plastic case material: ABS UL94V-1
- Weight: 30 gr
- Operating temperature: 0° to +50° C
- Storage temperature: -20° to +60° C
- Protection category: IP 20

- Power supply: +5vdc to +24vdc
- 12m. Maximum distance for motion detection
- Two TTL outputs, positive pulse and negative pulse
- Duration of output pulse with time adjustable: 1 sec to 10 sec
- Inhibition time adjustment between two detections: 5 sec to 12 sec
- Re-triggerable mode function
- Input to disable the sensor, compatible with I / O player InOut or external contact
- Bi-color LED indication, green = To pulse timer on, red = Ti inhibition timer on or Inibhit input active
- Consumption: 70mW max. (20mW stand-by)
- Dimensions: 70.4x50x28.7mm
- Available colors: w = Off-white d = Dark gray
- Plastic case material: ABS UL94V-1
- Weight: 35 gr
- Operating temperature: 0° to +50° C
- Storage temperature: -20° to +60° C
- Protection category: IP 2

- Power supply: +5vdc to +24vdc
- 12m. Maximum distance for motion detection
- Output with relay contacts, 3-way COM / NO / NC (max. 1A / 30Vdc.)
- Pulse duration of the output contact with time adjustable: 2 sec to 1 min
- Inhibition time adjustment between two detections: 5 sec to 12 min
- Dual mode function: re-triggerable e non re-triggerable
- Input to disable the sensor, compatible with I / O player InOut or external contact
- Bi-color LED indication, green = To pulse timer on, red = Ti inhibition timer on
- Red LED indication sensor disabled, Inibhit input active
- Consumption: 500mW max. (10mW stand-by)
- Dimensions: 90.4x50x28.7mm
- Available colors: w = Off-white d = Dark gray
- Plastic case material: ABS UL94V-1
- Weight: 50 gr
- Operating temperature: 0° to +50° C
- Storage temperature: -20° to +60° C
- Protection category: IP 20